This is an operator's manual that introduces the operation methods of Z-45 25/Z-45 25J, including safety rules, personal safety, work area safety, symbol, control, inspection, operating instructions, transportation and lifting instructions, maintenance and specifications
This manual provides safety guidelines, operating instructions, and maintenance procedures for Genie’s Z-45 25 and Z-45 25J aerial lifts. It includes hazard symbols, pre-operation checks, and detailed specifications for both base and jib models. The document emphasizes operator training and safety compliance to prevent injury or equipment damage.
The Z-45 25J model has a maximum platform height of 46 ft 2 in and a horizontal reach of 25 ft 1 in, while the Z-45 25 has a maximum platform height of 45 ft 11 in and a horizontal reach of 125 ft. Both models support a maximum load capacity of 500 lbs (227 kg) and operate on 12V DC proportional controls with hydraulic pressure up to 3200 psi.
| Height, working maximum (Z-45/25) | 51 ft 11 in (16 m) |
|---|---|
| Height, platform maximum (Z-45/25) | 45 ft 11 in (14 m) |
| Horizontal reach maximum (Z-45/25) | 125 ft (17.62 m) |
| Maximum load capacity (Z-45/25) | 500 lbs (227 kg) |
| Maximum wind speed | 28 mph (12.5 m/s) |
| Platform rotation (Z-45/25J) | 160 degrees |
| System voltage | 12V |
| Hydraulic pressure, maximum | 3200 psi (221 bar) |
| Fuel tank capacity | 17 gallons (64.4 liters) |
| Ground clearance, center | 15.5 in (39.4 cm) |
The maximum platform height for the Z-45/25J model is 46 ft 2 in (14.07 m).
The maximum load capacity for the Z-45/25 model is 500 lbs (227 kg).
The system voltage is 12V DC proportional.
The maximum hydraulic pressure is 3200 psi (221 bar).