FOSROC CONBEXTRA EP10 Manuals

ManualLib has 2 documents for the FOSROC CONBEXTRA EP10 (Chemical products): 1 other, 1 application note. Every file can be read online or downloaded as a PDF for free.

Other 1Application Note 1

Key facts

Brand
Fosroc
Model
CONBEXTRA EP10
Documents
2
Languages
ZH · EN
Last added
2023-11-17

Start here

FOSROC CONBEXTRA EP10 Safety Data Sheet

FOSROC CONBEXTRA EP10 Safety Data Sheet

Other 8 pages · 340 KB · ZH

This document is a safety data sheet for CONBEXTRA EP10 BASE and CONBEXTRA EP10 HARDENER, the two components of a two-component epoxy grout. It covers composition, hazards, first aid, fire, spill response, handling, storage, exposure control, physical properties, stability, toxicology, ecology, disposal, transport, and regulatory information.

The base is a white liquid with a slight odor, while the hardener is a clear liquid with a strong amine odor. The sheet also lists recommended protective equipment, storage conditions, and transport classifications for each component. This manual is written in Chinese.

Read online

FOSROC CONBEXTRA EP10 specifications

Physical state (base)Liquid
Boiling point (base)>200 C
Flash point (base)>150 C
Vapor pressure (base)0.1 kPa at 20 C
Relative density (base)1.05-1.15 at 20 C
Odor (hardener)Strong amine odor
Boiling point (hardener)>230 C
Flash point (hardener)110 C
Autoignition temperature (hardener)350 C
Explosion lower limit (hardener)1.2 vol%
Vapor pressure (hardener)0.02 kPa at 20 C
Relative density (hardener)0.90-0.95 at 20 C
Epoxy resin content (base)>50%
2,3'-epoxy resin content (base)>30%
Modified aliphatic polyamine content (hardener)>30% and <70%
Cycloaliphatic amine content (hardener)>30% and <70%

Source: FOSROC CONBEXTRA EP10 Safety Data Sheet

All FOSROC CONBEXTRA EP10 documents by type

Application Note 1

How to use the product for one specific task, with worked examples.

Questions answered in these manuals

What is CONBEXTRA EP10 BASE used for?

It is the base for a two-component epoxy grout.

From: FOSROC CONBEXTRA EP10 Safety Data Sheet

What personal protective equipment is recommended?

Wear sealed gloves (for example PVC), safety glasses or goggles, and a plastic apron.

From: FOSROC CONBEXTRA EP10 Safety Data Sheet

What is this application guide for?

It provides guidance for typical use of Conbextra EP10 and Conbextra EP65 Plus as bonded anchors for vertical anchoring applications.

From: Fosroc Conbextra EP10 and EP65 Plus Epoxy Grouts Bonded Anchoring Application Guide

How long should the concrete cure before anchoring?

A minimum of 28 days (4 weeks) curing should be allowed unless special concrete mixes are being used.

From: Fosroc Conbextra EP10 and EP65 Plus Epoxy Grouts Bonded Anchoring Application Guide