Key facts
- Brand
- Flex innovations
- Model
- Mamba 10
- Documents
- 2
- Languages
- EN
- Last added
- 2026-09-28
Start here
Flex Innovations Mamba 10 G2 User Manual
This user manual covers everything needed to build and fly the Flex Innovations Mamba 10 G2, a high‑performance 10‑class aerobatic model. It includes a parts list, specifications, safety information, and detailed step‑by‑step assembly instructions.
Key sections guide you through installing the landing gear, tailwheel, and stabilizer, configuring the Aura 8 flight controller, setting up your transmitter, charging and installing the recommended Li‑Po battery, and diagnosing common issues with troubleshooting tips.
Flex Innovations Mamba 10 specifications
| Weight (ready‑to‑fly) | 354.0 oz (1540 g) |
|---|---|
| Wingspan | 40.7 in (1033 mm) |
| Wing area | 691.3 sq in (44.6 dm²) |
| Recommended battery | 1300‑1500 mAh 6S 45C+ Li‑Po |
All Flex Innovations Mamba 10 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I calibrate the ESC throttle?
Power the aircraft, listen for the ESC’s initialization tones, then move the throttle stick to full throttle, connect the battery, and listen for the final arming tone before pulling the stick back to idle.
What is the low voltage cutoff feature?
The low voltage cutoff is built into the ZTW 50A ESC and shuts off motor power when the pack voltage drops below 3.0 V per cell, while still powering the servos for a safe landing.
What is the recommended battery for the Mamba 10?
The recommended battery is the Potenza 3S 2200mAh 45C LiPo and the 4S 2200mAh 40C LiPo.
What is the low voltage cutoff for the battery?
The low voltage cutoff is set at 3.15v per cell average, which will automatically shut off the motor to prevent damage.