The manual provides assembly, setup, battery handling, safety warnings, and troubleshooting for the Flex Innovations Mamba 10 G2 RC aircraft.
This user manual covers everything needed to build and fly the Flex Innovations Mamba 10 G2, a high‑performance 10‑class aerobatic model. It includes a parts list, specifications, safety information, and detailed step‑by‑step assembly instructions.
Key sections guide you through installing the landing gear, tailwheel, and stabilizer, configuring the Aura 8 flight controller, setting up your transmitter, charging and installing the recommended Li‑Po battery, and diagnosing common issues with troubleshooting tips.
| Weight (ready‑to‑fly) | 354.0 oz (1540 g) |
|---|---|
| Wingspan | 40.7 in (1033 mm) |
| Wing area | 691.3 sq in (44.6 dm²) |
| Recommended battery | 1300‑1500 mAh 6S 45C+ Li‑Po |
Power the aircraft, listen for the ESC’s initialization tones, then move the throttle stick to full throttle, connect the battery, and listen for the final arming tone before pulling the stick back to idle.
The low voltage cutoff is built into the ZTW 50A ESC and shuts off motor power when the pack voltage drops below 3.0 V per cell, while still powering the servos for a safe landing.
Insert the tailwheel assembly so that it sweeps backwards into the slot at the bottom of the rudder, then secure it with the three M3×12 self‑tapping screws.