Key facts
- Brand
- ELEKTRA
- Model
- VCD10
- Documents
- 3
- Languages
- EN · RO
- Last added
- 2023-10-17
Start here
ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
This manual provides installation instructions for the ELEKTRA VCD10 (10 W/m) and VCD17 (17 W/m) heating cables. These cables are primarily designed for use with tile or natural stone floors but can also be used with fitted carpets, vinyl flooring, parquet, and laminate, provided the floor covering is suitable for electric underfloor heating.
The document details the installation process on slab floors or concrete subfloors using thermal insulation and anhydrite or cement screed. It specifies that cables should not be cut, shortened (except the power supply conductor), or stretched excessively. The manual also outlines minimum spacing requirements between cables based on floor type and screed characteristics.
ELEKTRA VCD10 specifications
| Heat output VCD10 | 10 W/m |
|---|---|
| Heat output VCD17 | 17 W/m |
| Power supply voltage | 230 VAC, 50/60 Hz |
| External dimensions | ≈ 5 x 7 mm |
| Min. installation temperature | -5°C |
Source: ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
All ELEKTRA VCD10 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What floor coverings are suitable for these heating cables?
They are intended for tile or natural stone, but can also be used with fitted carpet, vinyl flooring, parquet, and laminate.
From: ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
What floor covering materials are suitable for use with these heating cables?
These cables are intended for tile or natural stone floors, but can also be used with fitted carpet, vinyl flooring, parquet, laminate, or other wooden coverings provided the carpet and vinyl bear specific markings.
From: ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
What floor coverings are suitable for ELEKTRA VCD heating cables?
They are primarily intended for tile or natural stone floors, but can also be used with fitted carpets, vinyl flooring, parquet, and laminate.
From: ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
Can ELEKTRA VCD heating cables be shortened?
No, the heating cable itself should never be cut or shortened; only the power supply conductor may be shortened if required.
From: ELEKTRA VCD10 and VCD17 Heating Cables Installation Manual
What floor coverings are compatible with these heating cables?
The cables can be used under tiles or natural stone, as well as vinyl, carpet, parquet, and laminate flooring.
From: ELEKTRA VCD10/VCD17 Electric Floor Heating Cable Installation Guide
Can the heating cables be cut or shortened?
No, the heating cables must not be cut. Only the length of the power cable may be reduced if necessary.
From: ELEKTRA VCD10/VCD17 Electric Floor Heating Cable Installation Guide