Key facts
- Brand
- Badger Meter
- Model
- M-5000
- Category
- Industrial Robot
- Documents
- 2
- Languages
- EN
- Last added
- 2023-10-27
Start here

Badger Meter M-5000 Mag Meter Installation and Operation Manual
The Badger Meter M-5000 is an electromagnetic flow meter designed for fluid metering in various industries, including water, wastewater, food and beverage, pharmaceutical, and chemical applications. The system consists of a detector, which includes the flow tube, isolating liner, and measuring electrodes, and an amplifier responsible for signal processing and display. The manual details the setup of both integral meter mount and remote junction box configurations.
Read onlineBadger Meter M-5000 specifications
| Flow Range | 0.328 to 32.8 fps (0.1 to 10 m/s) |
|---|---|
| Sizes | 1/2-inch to 24 inches (15 mm to 600 mm) |
| Min. Conductivity | ≥ 20 micro siemens/cm |
| Accuracy | ± 0.50% of rate for velocities greater than 1.64 ft/s |
| Electrode Materials | Standard: Alloy C; Optional: 316 stainless steel |
| Liner Material | PTFE 1/2 inch to 24 inches, hard rubber 1 inch to 24 inches |
| Fluid Temperature (Remote Amplifier) | PTFE 311°F (155°C); Hard Rubber 178°F (80°C) |
| Ambient Temperature | -4°F to 140°F (-20°C to 60°C) |
| Meter Housing Material | Carbon steel welded |
| Flanges | Carbon steel - Standard (ANSI B16.5 Class 150 RF); 316 stainless steel (optional) |
Source: Badger Meter M-5000 Mag Meter Installation and Operation Manual
All Badger Meter M-5000 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What are the straight pipe requirements for the M-5000?
An equivalent of three diameters of straight pipe is required on the inlet side, and two diameters are required on the outlet side.
From: Badger Meter M-5000 Mag Meter Installation and Operation Manual
Can the M-5000 measure flow in any pipeline orientation?
Yes, mag meters can operate accurately in any pipeline orientation and can measure volumetric flow in forward and reverse directions.
From: Badger Meter M-5000 Mag Meter Installation and Operation Manual
What are the requirements for straight pipe runs for optimum accuracy?
An equivalent of 3 to 7 pipe diameters is required on the inlet side, and two diameters are required on the outlet side.
From: Badger Meter M5000 Electromagnetic Flow Meter User Manual
What is the M5000 electromagnetic flow meter intended for?
It is intended for fluid metering in most industries including potable water, reclaimed water, food and beverage, pharmaceutical and chemical.
From: Badger Meter M5000 Electromagnetic Flow Meter User Manual
