Key facts
- Brand
- Analog Devices
- Model
- AD736
- Industry
- Industrial
- Documents
- 3
- Languages
- EN
- Last added
- 2012-08-03
Start here

Analog Devices AN-269 Application Note Extend RMS-to-DC Converter's Range
The document details a method to autorange an AD736 rms-to-DC converter, allowing it to measure input signals up to 10 V while maintaining high accuracy. This is achieved by using the hysteresis of a voltage comparator IC to automatically switch in an attenuator network and a gain stage when the input signal exceeds the device's standard full-scale range.
Read onlineAnalog Devices AD736 specifications
| Input Resistance (High Impedance) | 10^12 Ω |
|---|---|
| Input Bias Current | 25 pA maximum |
| Operating Voltage Range | +2.8 V, −3.2 V to ±16.5 V |
| Quiescent Current (Zero signal) | 160 μA |
| Output Offset Voltage (J and K Grades) | ±0.1 mV |
| Temperature Range (Commercial) | 0°C to +70°C |
Source: ANALOG DEVICES AD736: Low Cost Low Power True RMS-to-DC Converter Data Sheet (Rev H 2007-02-01-)
All Analog Devices AD736 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What input signal range can this circuit resolve with less than 1% total error?
The circuit can resolve input signals from 1 mV to 10 V with less than 1% total error.
From: Analog Devices AN-269 Application Note Extend RMS-to-DC Converter's Range
What is the low-frequency cutoff for this circuit?
The low frequency cutoff (-3 dB) is 20 Hz.
From: Analog Devices AN-269 Application Note Extend RMS-to-DC Converter's Range
What is the maximum error of the AD736 with sine wave inputs?
The maximum error is ±0.3 mV ± 0.3% of reading.
From: ANALOG DEVICES AD736: Low Cost Low Power True RMS-to-DC Converter Data Sheet (Rev H 2007-02-01-)
Does the AD736 require external trims for specified accuracy?
No, no external trims are needed for specified accuracy.
From: ANALOG DEVICES AD736: Low Cost Low Power True RMS-to-DC Converter Data Sheet (Rev H 2007-02-01-)
