This guide provides instructions for charging, installing SIM cards, connecting via USB or Wi-Fi, and configuring the ZTE MF60 mobile hotspot device.
The ZTE MF60 is a 3G/2G mobile hotspot device that allows client devices to connect via USB or Wi-Fi interfaces. This quick guide covers hardware installation, including charging the device, inserting the SIM card and battery, and adding a microSD card. It also explains how to switch the device on and off and how to establish a connection using either a USB cable or a wireless network.
| Network Type | GSM/GPRS/EDGE/WCDMA/HSPA/HSPA+ |
|---|---|
| Data Service (HSPA+) | DL 21.6 Mbps, UL 5.76 Mbps |
| Data Service (WCDMA CS) | 64 kbps |
| Data Service (WCDMA PS) | 384 kbps |
| Wi-Fi Standard | 802.11 b/g |
| USB Version | USB 2.0 HIGH SPEED |
| Weight | 75 g |
| Dimensions | 99.7 mm*53.7 mm*13.9 mm |
| Battery Capacity | 1500 mAh |
| Standby Time | 100 hours |
| Working Time | 4 hours |
| Operating Temperature | 0°C ~ +35°C |
Hold the WPS and Power buttons simultaneously until the LED screen turns off, then release the buttons.
The default password is 'admin' (case-sensitive).
You can access the configuration page at http://192.168.0.1 or http://ufi.home.
The device supports microSD cards up to 32 GB.