Zhixin ZX1359/ZX1362 Series Leakage Current/Insulation Resistance Tester User Manual

User manual for the Zhixin ZX1359/ZX1362 series leakage current/insulation resistance tester, covering setup, tests, interfaces and commands.


Zhixin ZX1359/ZX1362 Series Leakage Current/Insulation Resistance Tester User Manual - cover page
Brand
ZhiXin
Category
Other Electronics
Document type
User Manual
Language
Chinese
Pages
58
File format
PDF
File size
928 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
546093A717CED1F51F68998DF15929E2

About this manual

This manual is for the Zhixin ZX1359/ZX1362 series leakage current/insulation resistance tester. It covers safety warnings, unpacking checks, power and environmental requirements, fuse requirements, accuracy guarantee, front and rear panels, basic operation, and power-on guidance.

It also describes DUT connection, measurement setup, sequential, single-step and continuous tests, null and foil withstand voltage tests, file storage, system settings, test configuration, system information, test performance, remote control interfaces, handler interface, and command reference. This manual is written in Chinese.

What's inside

  • Instrument inspection and preparation
  • Instrument overview and panel descriptions
  • Basic operation and power-on guide
  • DUT connection and measurement setup
  • Sequential, single-step and continuous tests
  • Null and foil withstand voltage tests
  • File storage
  • System settings and test configuration
  • Remote control and handler interfaces
  • Command reference

Specifications

Power supply voltage100-120 Vac or 198-242 Vac
Power supply frequency46-64 Hz
Power consumptionGreater than 85 VA
Operating temperature0-40 C
Operating relative humidityUp to 75% RH
Storage temperature5-40 C
Storage relative humidityUp to 85% RH
Insulation resistance (reference conditions)Not less than 50 MΩ
Insulation resistance (humid transport)Not less than 2 MΩ
Dielectric withstand1.5 kV at 50 Hz for 1 minute
Leakage currentNot greater than 3.5 mA
Warm-up timeAt least 20 minutes

Frequently asked questions

What power supply does the tester require?

It requires 100-120 Vac or 198-242 Vac at 46-64 Hz, with power greater than 85 VA.

What are the recommended operating conditions?

Use it at 0-40 C and relative humidity up to 75% RH.

How long should the instrument warm up before accurate measurement?

Warm-up time should be at least 20 minutes.

What safety and insulation ratings are specified?

It is a Class I safety instrument with insulation resistance not less than 50 MΩ under reference conditions, not less than 2 MΩ under humid transport, dielectric withstand of 1.5 kV at 50 Hz for 1 minute, and leakage current not greater than 3.5 mA.

Download PDF (928 KB)

More ZhiXin Manuals


View all ZhiXin manuals →