Datasheet for the Yichuan Electronics (YLPTEC) CTM1051KAT/CTM1051KT high-speed isolated CAN bus transceiver modules with 3500VDC isolation, specs, pinout…
The CTM1051KAT/CTM1051KT are high-speed CAN bus transceiver modules from Zhongshan Yichuan Electronics Technology (YLPTEC) that integrate an isolated power supply, a signal isolation chip and a CAN transceiver chip in one package. The module converts logic levels to the differential levels of the CAN bus and provides signal isolation, with a built-in regulated isolated power supply giving 3500VDC electrical isolation and high ESD protection. It complies with the ISO 11898-2 standard, supports at least 110 nodes per network, and its housing and potting material meet the UL94-V0 standard.
The CTM1051KAT version operates from a 3.3V supply (3.15–3.45VDC) with 3.3V TXD/RXD logic levels, while the CTM1051KT operates from a 5V supply (4.75–5.25VDC) with 5V logic levels; each does not support the other system's level. Both types support baud rates from 40kbps to 1Mbps. The datasheet covers dimensions, pin definitions, maximum ratings, input/output and transmission characteristics, EMC performance, typical application and EMC-recommended circuits, and usage precautions. Stated applications include automotive electronics, instrumentation, railway transport, petrochemical, power monitoring, industrial control and smart home. This manual is written in Chinese.
| Supply voltage (CTM1051KAT) | 3.3VDC (3.15–3.45VDC) |
|---|---|
| Supply voltage (CTM1051KT) | 5VDC (4.75–5.25VDC) |
| Nodes per network | 110 |
| Isolation voltage | 3500VDC |
| Operating temperature range | -40 to +85°C |
| Storage temperature | -55 to +125°C |
| Package dimensions | 19.50 × 16.50 × 7.10mm |
| Weight | 4.0g (nominal) |
| Housing material | Black flame-retardant heat-resistant plastic (UL94-V0) |
| Standard | ISO 11898-2 |
| ESD immunity (with recommended circuit) | Contact ±8kV / Air ±15kV |
| Max communication distance (high-speed type) | 1km |
No. The CTM1051KT's TXD and RXD pins match 5V logic levels and do not support 3.3V system levels; use the CTM1051KAT for 3.3V systems.
Yes. When building a CAN bus network, a terminal resistor must be added regardless of the number of nodes, distance or baud rate.
Pin 5 of the module is not brought out, and if pin 8 is unused it should be left floating.
No. The series has no input anti-reverse connection function; reversing the input polarity causes irreversible damage.