Instruction manual for the TSI Model 3076 Constant Output Atomizer, covering setup, operation, maintenance, and technical specifications.
This document is the instruction manual for the TSI Model 3076 Constant Output Atomizer. It provides comprehensive guidance on unpacking, setting up the device in both recirculation and nonrecirculation modes, and operating it to generate aerosols. The manual details applications such as generating solid particles (e.g., sodium chloride) and oil aerosols.
| Number mean droplet diameter (DOP) | 0.30 µm |
|---|---|
| Number mean droplet diameter (water) | 0.35 µm |
| Max PSL size | 2 µm |
| Geometric standard deviation | 1.6 to 2.0 |
| Particle material | PSL, DOP, oils, and other aqueous or alcohol solutions or suspensions |
| Generation rate (nominal) | 2 × 106 particles/cm3 (108 particles/sec) |
| Air flow rate | 3.0–3.5 L/min at 2.5 kg/cm2 [35 psig] |
| Liquid flow rate | 20 cm3/min at 35 psig |
| Liquid consumption rate (water) | Approximately 0.1 cm3/min |
| Dimensions Base | 20 × 30 cm [7.9 × 11.8 in.] |
| Dimensions Stem | 6 × 8 × 46 cm [2.4 × 3.1 × 18.1 in.] |
| Weight | 4.5 kg [10 lb] |
The outlet pressure should be maintained close to atmospheric pressure, below 10 psig.
The atomizer is equipped with a pressure relief valve that actuates whenever the pressure in the bottle exceeds 10 psig.
The atomizer can generate aerosols from PSL, DOP, oils, and other aqueous or alcohol solutions or suspensions.