User manual for the Total Phase SOIC-8/SOIC-8W and SOIC-16 Flash Socket Boards used to program SPI Serial Flash chips with a Cheetah or Aardvark adapter.
The Flash Socket Boards User Manual describes the Total Phase SOIC-8/SOIC-8W Flash Socket Board and SOIC-16 Flash Socket Board, which let a developer flash and burn stand-alone SPI Serial Flash memory chips using a Cheetah SPI Host Adapter or Aardvark I2C/SPI Host Adapter as the interface from a Windows or Linux computer. The SOIC-8/SOIC-8W board supports SOIC-8 and SOIC-8W chip packages, while the SOIC-16 board supports the SOIC-16 package. The boards provide 3.3 V to the target device, and multiple socket board and adapter sets can be used in parallel on the same host computer for gang programming.
The manual covers the boards' features and contents, the Flash Center programming software, the Cheetah and Aardvark host adapters, the sockets and their compatible chip sizes, socket pinouts, the 10-pin boxed connectors, powering the boards, and how to insert and remove a device. It also lists supported SPI Serial Flash vendors and includes the disclaimer, life support equipment policy, and Total Phase contact information.
| Supported chip packages | SOIC-8, SOIC-8W, SOIC-16 |
|---|---|
| Target device supply voltage | 3.3 V |
| Socket type | Zero insertion force |
| Programming connector | 10-pin boxed header per socket |
| Pin pitch (all sockets) | 1.27 mm |
| Lead tip to tip width (E) | SOIC-8W 8.00 mm, SOIC-8 6.00 mm, SOIC-16 10.40 mm |
| Package thickness (A) | 1.90 mm |
The SOIC-8/SOIC-8W board supports SOIC-8 and SOIC-8W packages, and the SOIC-16 board supports the SOIC-16 package.
The Cheetah or Aardvark adapter must be configured to send target power to the board, for example through the Rosetta Language Bindings, Flash Center software, Aardvark Control Center Software or Cheetah GUI Software. The board provides 3.3 V and its Power LED lights when powered on.
Yes, gang programming is supported by using multiple socket board and programming adapter sets in parallel on the same host computer.
The free Flash Center Software is used with a Cheetah or Aardvark adapter to erase, program and verify SPI Serial Flash memory chips.