User manual for Total Phase's Advanced Cable Tester v2, a modular cable tester with web interface, USB/Ethernet support, and tests for USB Type-C, HDMI, and…
The Advanced Cable Tester v2 is a modular, web-based cable tester designed for factory and lab environments. It supports multiple cable types including USB Type-C, HDMI, and MFi Lightning, with tests for continuity, DC resistance, signal integrity, E-Marker verification, and Apple MFi mandated tests. It can operate with or without a host PC, providing audio and visual pass/fail feedback. The device features replaceable modules, a front LCD screen, and a back panel with USB, LAN, and grounding connections. Firmware and hardware versions are displayed in the web interface, and test reports are stored in a circular buffer with a deletion feature.
| Supported Cable Types | USB Type-C to USB Type-C, USB 3.1 Standard-A to USB Type-C, USB Type-C to USB 3.1 Micro-B, USB 3.1 Standard-A to USB 3.1 Micro-B, USB 3.1 Standard-A to USB 3.1 Standard-B, USB Type-C to USB 3.1 Standard-B, HDMI Type A to HDMI Type A, USB 3.1 Standard-A to MFi Lightning, USB Type-C to MFi Lightning |
|---|---|
| Module Insertion Limit | 1,000 insertions |
| Connector Module Test Limit | 10,000 cable tests |
Connect the ACT v2 tester to the included power adapter and plug it into a power source. Then, connect a USB cable from the ACT v2 USB port to a local computer. The ACT v2 tester uses the RNDIS driver.
It supports USB Type-C to USB Type-C, USB 3.1 Standard-A to USB Type-C, USB Type-C to USB 3.1 Micro-B, USB 3.1 Standard-A to USB 3.1 Micro-B, USB 3.1 Standard-A to USB 3.1 Standard-B, USB Type-C to USB 3.1 Standard-B, HDMI Type A to HDMI Type A, USB 3.1 Standard-A to MFi Lightning, and USB Type-C to MFi Lightning.
A connector module is rated for up to 10,000 cable tests.