tesa general industrial tape catalog covering tape structures, bonding factors, and acrylic foam, PE foam, and double-sided tape product ranges.
This tesa general industrial product catalog introduces high-performance self-adhesive tape solutions for bonding, mounting, sealing, masking, packaging, and bundling. It explains tape construction, the effects of time, pressure, temperature, surface energy, and surface roughness on adhesion, and the properties of backing, adhesive, and liner materials.
The catalog lists acrylic foam tape, PE foam tape, double-sided nonwoven tape, double-sided film tape, single-sided film tape, single-sided paper tape, fiber tape, MOPP tape, single-sided cloth tape, other products, primers, and application and storage guidance, with performance tables for many tesa product numbers. This manual is written in Chinese.
| Recommended application temperature | greater than 10 °C |
|---|---|
| Recommended settling time before testing | at least 72 h |
| Surface energy threshold for good application | greater than 36 dyn/cm |
| Preferred surface roughness range | VDI 15–21 |
| tesa 7042 thickness | 500 µm |
| tesa 7042 final peel adhesion to steel | 23 N/cm |
| tesa 7044 thickness | 1000 µm |
| tesa 7044 final peel adhesion to aluminum | 35 N/cm |
| tesa 7048 thickness | 2000 µm |
| tesa 7072 short-term temperature resistance | 220 °C |
| tesa 7072 long-term temperature resistance | 120 °C |
| tesa 62622 thickness | 150 µm |
| tesa 62622 final peel adhesion to steel | 13.5 N/cm |
| tesa 62622 tensile strength | 12 N/cm |
| tesa 62622 elongation at break | 380 % |
| tesa 62932 thickness | 500 µm |
| tesa 62932 final peel adhesion to steel | 17 N/cm |
| tesa 63630 thickness | 3000 µm |
| tesa 63630 tensile strength | 20 N/cm |
The catalog recommends leaving the tape in place for at least 72 hours after application before further testing.
An application temperature above 10 °C is recommended because lower temperatures reduce adhesive flow and initial tack.
Adhesion is generally better when the surface energy of the substrate is above 36 dyn/cm.
The listed factors are time, pressure, temperature, surface energy, and surface roughness.