User manual for the Team Associated APEX Scion tC Drift and Scion FR-S Drift RTR touring cars, covering setup, batteries, wiring, gear mesh and maintenance.
This Team Associated manual covers the APEX Scion tC Drift (#30114D) and APEX Scion FR-S Drift (#30113D) RTR touring cars. It introduces the assembled shaft-drive 4WD platform and lists included components such as the XP SC500-BL brushless ESC, Reedy 3300kV 540 brushless motor, Reedy WolfPack 6-cell NiMH battery, and XP 2.4GHz radio system.
The guide walks through the blueprint, quick start and battery charging, radio controls, wiring and camber/toe settings, gear mesh and ride height, spur gear and differential access, shock maintenance, and troubleshooting. It also notes additional items needed and includes motor and ESC manuals plus a hardware foldout and catalog.
| Drive type | Fully assembled shaft-drive 4WD touring car with gear differentials |
|---|---|
| Motor | Reedy 3300kV 540 brushless motor |
| Electronic speed control | XP SC500-BL brushless ESC, water resistant, 2S-3S LiPo compatible |
| Radio system | XP 2.4GHz radio system with XP metal gear steering servo |
| Included battery | Reedy WolfPack 6-cell NiMH battery with T-plug connector |
| Chassis | Composite modular chassis that accepts NiMH or LiPo batteries |
| Shock absorbers | Fluid-filled adjustable shock absorbers |
| Drive axles | All steel CVA drive axles front and rear |
| Differentials | Sealed metal gear differentials |
The APEX RTR can use NiMH or LiPo battery packs; when using a LiPo pack, the ESC must be set to LiPo mode.
Align the pinion gear face with the spur gear face, then adjust the motor so the teeth mesh closely but still have a small amount of clearance.
The stock setting is approximately 4 mm at the front and rear, adjusted with shock pre-load clips.
Push the throttle trigger forward to maximum brake and hold for at least 0.5 seconds, then push forward again.