The TA 6-10-25 series dynamic balancing electric control valve manual provides specifications, installation, and operation details for KT512, KTH512, and…
The TA 6-10-25 series dynamic balancing electric control valve integrates electric regulation, differential pressure control, and static balance in one unit. It is designed for variable flow cooling and heating systems, offering stable pressure drop control, precise flow adjustment, high flow accuracy (±3%), low resistance, and low noise. The valve body is made of ductile cast iron (EN‑GJS‑400‑1) with EPDM rubber sealing and stainless‑steel or EPDM valve cores depending on the model.
The manual includes technical parameters, product features, actuator selection, connection details, and step‑by‑step installation and maximum flow setting procedures. It lists compatible electric actuators such as EMOTec, TA‑R25‑24, and NV24‑MFT2, and provides wiring diagrams, performance data, and application examples for HVAC and heating systems. This manual is written in Chinese.
| Rated Pressure | 2.5 MPa |
|---|---|
| Maximum Working Differential Pressure | 1.6 MPa |
| Working Temperature Range | -10 °C to 140 °C |
| Valve Body Material | Ductile cast iron EN‑GJS‑400‑1 |
| Sealing Material | EPDM rubber |
| Valve Core Material (KT512) | EPDM rubber |
| Valve Core Material (KTH512 / KTM512) | Stainless steel |
| Travel (KT512) | 1.8 mm |
| Leakage Rate | < 0.02 % Kvs |
The valve is rated for a pressure of 2.5 MPa.
Compatible actuators include EMOTec models, TA‑R25‑24, and NV24‑MFT2, among others listed in the manual.
Loosen the fixing nut, rotate the maximum flow limiting device to 0.0 turn, adjust according to the flow setting table to the required number of turns, then tighten the nut.