SVF EZ-Tork Pneumatic Actuator Installation, Operation & Maintenance Manual

SVF EZ-Tork rack and pinion pneumatic actuator manual covering safety, installation, operation, disassembly, inspection and assembly.


SVF EZ-Tork Pneumatic Actuator Installation, Operation & Maintenance Manual - cover page
Brand
SVF
Category
Electric motor
Document type
User Manual
Language
English
Pages
8
File format
PDF
File size
650 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
50C0A8B0DA333102761D1E502A284A8A

About this manual

This manual covers installation, operation, maintenance and storage for SVF EZ-Tork rack and pinion pneumatic actuators. The aluminum actuators are double-acting or spring-return units designed for 90° rotation with stroke adjustment at 0° and 90°±5°.

The document includes safety warnings, operating media and pressure and temperature limits, operating principles for double-acting and spring-return versions, valve assembly instructions, a numbered parts list with materials, and step-by-step disassembly, inspection, maintenance and reassembly procedures.

What's inside

  • Important Safety Warnings
  • General
  • Description of EZ-Tork Actuators
  • Operating Media
  • Supply Pressure
  • Operating Temperature
  • Lubrication
  • Principle of Operation
  • Assembly to Valve
  • Disassembly of the Actuator

Specifications

Actuator typeDouble-acting or spring-return rack and pinion
Rotation90° with stroke adjustment at 0° and 90°±5°
Body materialAluminum alloy, hard anodized
Drive shaft materialAlloy steel, nickel plated
Maximum particle size0.001 in (30 µm)
Minimum supply pressure40 psig (2.5 bar)
Maximum supply pressure120 psig (8 bar)
Standard operating temperature (Buna O-ring)-5°F to 176°F (-15°C to +80°C)
High temperature operating range (Viton O-ring)-5°F to 300°F (-15°C to +150°C)
Low temperature operating range (Silastic O-ring)-76°F to 176°F (-60°C to +80°C)
Body interior surface finishRa 0.4–0.6 µm
MountingDouble square star pattern drive shaft, ISO mounting bolt pattern

Frequently asked questions

What operating media can be used with the EZ-Tork actuator?

The listed media are clean, dry and lubricated compressed air, light hydraulic oil, natural gas, and any other inert and non-corrosive gas after consulting SVF.

What is the supply pressure range for the actuator?

Supply pressure must be between 40 psig (2.5 bar) minimum and 120 psig (8 bar) maximum.

Does the actuator require lubrication after delivery?

No. The actuator is supplied ready-lubricated and no further lubrication is required.

How does the spring-return actuator operate?

Air to port A pushes the pistons outward and compresses the springs, turning the pinion counterclockwise; loss of air pressure lets the stored spring energy force the pistons inward and turn the pinion clockwise.

Download PDF (650 KB)

More SVF Manuals


View all SVF manuals →