Sumtor DM860H-IO digital two-phase stepper motor driver user manual covering specifications, wiring, DIP switch settings, and motor selection.
Sumtor DM860H-IO is a digital two-phase stepper motor driver using 32-bit DSP processing. It uses variable current and variable frequency control, has low heat and vibration, built-in high subdivision, and automatic parameter tuning at power-up. It is a self-pulsing driver whose speed and functions can be customized, and only switch signals are needed to control stepper motor rotation direction.
Suitable for various small and medium automation equipment and instruments, it drives 4-, 6-, or 8-wire two-phase/four-phase hybrid stepper motors with 1.8° or 0.9° step angles. The manual describes electrical, mechanical, and environmental specifications, control and power interfaces, wiring requirements, DIP switch settings, power supply selection, and motor selection. This manual is written in Chinese.
| Output current (peak) | 2.8 to 8.4 A |
|---|---|
| Input power supply voltage | 20/48/80 VAC (min/typ/max) |
| Control signal input current | 6/10/16 mA |
| Control signal interface level | 4.5/5/28 Vdc |
| Insulation resistance | 500 MΩ |
| Cooling method | Forced air cooling |
| Humidity | 40 to 90% RH |
| Vibration | 5.9 m/s² max |
| Storage temperature | -20 to 80 °C |
| Operating altitude | Below 1000 m |
| Weight | About 0.55 kg |
| Static current setting | Half of dynamic current with SW4 off; equal with SW4 on |
| Speed setting range | 40 to 850 rpm (default, customizable) |
| Compatible motors | 4-, 6-, or 8-wire two-phase/four-phase hybrid stepper motors, 1.8° or 0.9° step angle |
| Protections | Overvoltage, undervoltage, and overcurrent |
It can drive 4-, 6-, or 8-wire two-phase/four-phase hybrid stepper motors with 1.8° or 0.9° step angles.
Peak output current is adjustable from 2.8 A to 8.4 A.
With SW4 off, static current is about half of dynamic current; with SW4 on, it equals dynamic current.
Toggle SW4 once within one second while no pulse or direction signal is changing.