StaticControl SCS 718/718A Static Sensor and Air Ionizer Test Kit User Guide

This user guide covers the installation, operation, maintenance, and calibration procedures for the StaticControl SCS 718 Static Sensor and SCS 718A Air…

Brand: STATIC CONTROL
Document type: User Manual
Language: English
Pages: 6
File format: PDF
File size: 1.5 MB
Published: 16 October, 2026
Updated: 16 October, 2026
MD5 checksum: BDA166F664EDCA78D02888F0E205768F
PDF: StaticControl SCS 718/718A Static Sensor and Air Ionizer Test Kit User Guide PDF

About this manual

The document provides instructions for using the SCS 718 Static Sensor to locate and measure electrostatic charges. It details battery installation, measurement ranges (0 to ±1.999 kV or 0 to ±19.99 kV), zero adjustment procedures, and features like automatic shut-off and the HOLD function.

What's inside

Description
Power Requirements and Battery Installation
Operation of the Static Sensor 718
HOLD Function
Zero Adjustment
Measurement Accuracy
Continuous Output
Automatic Shut-Off
Operation and Use of SCS Air Ionizer Kit 718A
Service/Calibration

Specifications

Battery Type	9V alkaline battery
Measurement Range (Low)	0 to ±1.999 kV
Measurement Range (High)	0 to ±19.99 kV
Minimum Surface Area for Accuracy	5 square inch (32.3 cm2)
Automatic Shut-Off Time	20 minutes

Frequently asked questions

How do I change the measurement range on the SCS 718?

Press the RANGE/HOLD button once momentarily to switch between the low and high ranges.

How do I perform a zero adjustment on the sensor?

Point the instrument at a known zero-voltage surface and hold down the RANGE/ZERO button for longer than 3 seconds.

What indicates that the battery is low?

The instrument will display 'BAT' when the voltage drops to approximately 6.5 volts.

Are there user-serviceable parts on these units?

No, there are no user-serviceable parts; users should contact a representative for repair.

Download PDF (1.5 MB)