The Sony TA-A1ES Integrated Stereo Amplifier Operating Instructions provide setup, connection, safety, and performance details.
This manual covers safety precautions, main features, and the layout of the front and rear panels of the TA‑A1ES integrated stereo amplifier. It explains how to connect speakers and audio equipment, adjust volume, select input sources, and use the remote control.
Additional sections describe headphone impedance settings, the auto‑standby function, troubleshooting tips, and detailed specifications such as power output, frequency response, and power consumption.
| Rated Power Output | 60 W + 60 W per channel |
|---|---|
| Frequency response | 20 Hz – 20 kHz |
| Total harmonic distortion | 0.15 % (8 Ω) |
| Supported speaker impedance | 4 Ω or higher |
| Power consumption | 300 W (operating), 0.4 W (standby) |
| Dimensions (approx.) | 430 mm × 130 mm × 420 mm |
| Mass (approx.) | 17.0 kg |
| Input sensitivity (unbalanced) | 150 mV |
| Signal‑to‑noise ratio | 96 dB |
| Headphone impedance modes | LOW 8‑50 Ω, MID 50‑300 Ω, HI ≥300 Ω |
Set the AUTO STANDBY switch to ON; the amplifier will automatically enter standby after about 10–15 minutes of no audio output.
The amplifier delivers a rated output of 60 W per channel into an 8 Ω load from 20 Hz to 20 kHz.
Plug headphones into the PHONES jack and set the IMPEDANCE dial to LOW, MID, or HI to match the headphone impedance.