User manual for the SONOFF SNZB-01 ZigBee wireless switch, covering eWeLink app setup, pairing with a ZigBee Bridge, installation and specifications.
This is the user manual for the SONOFF SNZB-01, a ZigBee low-energy wireless switch powered by a CR2450 3V battery. The document explains how to download the eWeLink app, pull out the battery insulation sheet, add the switch as a sub-device to a SONOFF ZigBee Bridge (or another gateway supporting ZigBee 3.0), and pair it by long pressing the RST button for 5 seconds until the LED flashes three times.
The manual also describes the switch's button actions (press once, press twice or long press) for triggering smart scenes, how to delete sub-devices, and installation options: placing it on a desktop or sticking it with the 3M adhesive. It ends with product specifications, FCC warning text, and an EU declaration of conformity. The manual is provided in multiple languages, with English on pages 6-10.
| Model | SNZB-01 |
|---|---|
| Battery model | CR2450 |
| Working voltage | 3V |
| Wireless connection | ZigBee (IEEE 802.15.4) |
| Working humidity | 10-90%RH (non-condensing) |
| Material | PC |
| Dimension | 43x43x16mm |
| TX Frequency | ZigBee: 2405-2480MHz |
Connect the Bridge in the eWeLink app, tap "Add" to add a sub-device, then long press the RST reset button on the device for 5 seconds until the LED indicator flashes three times.
It uses a CR2450 3V battery.
Long press the reset button on the sub-device for 5 seconds until the LED indicator flashes three times; sub-devices can also be deleted from the app.