Data sheet for the Simco-Ion Guardian CR2000 cleanroom-rated overhead ionizing blower, covering features, specifications and ordering information.
The Guardian CR2000 is a cleanroom-rated overhead ionizing blower from Simco-Ion, available in 2-fan and 3-fan chassis lengths. It uses a patented circuit to deliver positive and negative ions in balance, maintaining an ion balance of 0 ±10V, with "ion shields" at the fan outputs to reduce parasitic ion loss. Fan assemblies are particle-tested to ISO 14644 Class 4 (Fed Std. 209E Class 10) limits, and fan and air bearing surfaces are silicone-free.
The unit includes a built-in emitter point cleaner for each fan, a lockout key switch, and internal balance and ion output monitors that verify the presence of balanced, ionized air. A standard IEC 320 power outlet on each blower allows daisy-chaining of up to 10 units from one power source. The data sheet lists specifications, discharge time performance, and ordering information for 120V and 230V models.
| Input Voltage (2-fan) | 120 VAC, 50/60 Hz, 0.2A; 230 VAC, 50/60 Hz, 0.1A |
|---|---|
| Input Voltage (3-fan) | 120 VAC, 50/60 Hz, 0.3A; 230 VAC, 50/60 Hz, 0.15A |
| Balance | 0 ±10V @ 18" (46 cm) from blower face |
| Discharge | 13.0 sec @ 18" (46 cm) center blower position, fan high (1000-100V) |
| Coverage | 2-fan: 2' x 3' (61 x 91 cm); 3-fan: 2' x 4' (61 x 121 cm) |
| Cleanroom Class | ISO 14644 Class 4 (Fed Std. 209E Class 10) |
| Emitters | Stainless Steel emitter points |
| Controls | 3-position key switch OFF, ADJUSTABLE, HIGH; recessed fan speed control |
| Indicators | Ionization Status: green NORMAL, red MAINTENANCE LEDs |
| Air Volume | 2-fan: 90 cfm low, 180 cfm high; 3-fan: 135 cfm low, 270 cfm high |
| Air Velocity | 200 fpm (1.0 m/s) fan low; 400 fpm (2.0 m/s) fan high @ 18" (46 cm) |
| Audible Noise | 48 dBA fan low; 58 dBA fan high @ 2' (61 cm) |
| Operating Environment | 32-122°F (0-50°C); 30-70% RH, non-condensing |
| Ozone | 0.02 ppm measured @ 18" (46 cm) above test plate |
| Power Outlets | Input IEC 320; output IEC 320, daisy-chain of up to 10 units |
| Mounting | Adjustable brackets and S hooks provided |
| Enclosure | Aluminum with glossy white polyurethane finish |
| Dimensions | 2-fan: 31.75"W x 4"H x 6.75"D; 3-fan: 42.75"W x 4"H x 6.75"D |
| Weight | 2-fan: 12 lb (5.5 kg); 3-fan: 15 lb (6.8 kg) |
| Warranty | Two year limited warranty |
It maintains an ion balance of 0 ±10V, measured at 18" (46 cm) from the blower face.
Up to 10 units can be connected in series from one power source using the standard IEC 320 power outlet on each blower.
Fan assemblies are particle-tested to ISO 14644 Class 4 (Fed Std. 209E Class 10) particle limits, and all fan and air bearing surfaces are silicone-free.
The 2-fan blower covers a 2-foot by 3-foot area, and the 3-fan blower covers a 2-foot by 4-foot area.