This manual describes the use and maintenance of the H / HS / HE series air ionization nozzles.
Simco-Ion H, HS and HE are air ionizing nozzles intended to clean and neutralize surfaces charged with static electricity. When connected to a Simco-Ion power supply, they generate an air flow rich in positive and negative ions, and compressed air allows simultaneous cleaning and neutralization of hard-to-reach places.
The manual covers safety, use and operation, technical specifications, installation and high-voltage cable connections, start-up, operating checks, maintenance, faults, repair and decommissioning. This manual is written in Spanish.
| Service voltage (H / HS / HE) | H: 4 kV AC; HS: 7 kV AC; HE: 7 kV AC |
|---|---|
| Current from ionization tip to ground (H / HS / HE) | H: 2.50 mA max; HS: 20 µA max; HE: 0.5 mA max |
| Service distance | 50 – 250 mm |
| Maximum pressure (H / HS / HE) | H: 6 bar; HS: 6 bar; HE: 7 bar |
| Pressure medium | Air or nitrogen |
| Nozzle air connection | 1/8” BSPT |
| Air tube connection | 3/8” BSP |
| Maximum ambient temperature | 66 °C |
They are used to clean and neutralize surfaces charged with static electricity.
The nozzles should be placed at a distance of 50 to 250 mm from the material.
Yes, the HS nozzle ionization tips can be touched without danger because the current is limited.
Use a hard, non-metallic bristle brush; if they are very dirty, remove the tips and clean them with isopropyl alcohol, except HE tips.