Technical Information Manual for the wet application of the SikaWrap composite strengthening system using a saturator.
This Technical Information Manual is a guideline for using the SikaWrap composite system for structural strengthening. It covers the wet application process with a saturator, including system description, products, equipment, health and safety, preparation, application, inspection and testing.
The manual lists SikaWrap carbon and glass fibre fabrics, Sikadur epoxy impregnation resins and additional products, along with storage conditions, required tools, personal protection measures and substrate preparation requirements.
| Fabric area weight range | 300 g/m2 to 930 g/m2 |
|---|---|
| Available fabric widths | 100 mm, 300 mm, 600 mm |
| Standard roll length | 50 metres |
| Resin storage temperature | +5°C to +25°C |
| Fabric storage temperature | +5°C to +35°C |
| Product shelf life | up to 24 months from the date of production |
| Substrate moisture content | less than 4 % |
| Application temperature above dew point | at least +3 °C |
| Resin conditioning time | at least 24 hours |
It only describes the wet application process using a saturator. Dry application and manual wet application are covered by separate Technical Information Manuals.
It contains FRP fabrics and impregnation resins that are applied on the strengthening site and formed into a fibre composite.
Structural strengthening must only be carried out by trained and experienced specialists, with work directed by a suitably qualified Structural Engineer.
Clean all tools and application equipment with Sika Thinner C immediately after use. Hardened material can only be removed mechanically.