Installation and safety manual for the Savanini rear wheel electronic hand brake kit with a 332x10mm one-piece big rotor.
The document is a universal manual for the Savanini rear wheel electronic hand brake kit with a bigger 332x10mm one-piece rotor. It gives safety warnings and covers intended use, brake balance, break-in after replacement, brake pad wear limits, caliper temperature limits, brake fluid air bleeding, brake noise, maintenance, and brake hose care.
It also includes a rear big rotor parts list, reference diagrams, installation notes with tightening torques, and left rear caliper installation diagrams. The text is in Chinese. This manual is written in Chinese.
| Rear big rotor size | 332x10mm, 1-piece rotor |
|---|---|
| Maximum caliper operating temperature | 180 degrees or less |
| Brake pad replacement thickness | 10 mm including backing plate |
| Brake pad minimum thickness for severe driving | 12 mm |
| Brake hose replacement interval | Every 4 years |
| Caliper and bridge bolt tightening torque | M10: 58 N·m (6 kgf·m); M12: 108 N·m (11 kgf·m) |
| Bleeder plug tightening torque | About 1.8 kgf·m (18 N·m) |
It uses a 332x10mm one-piece rotor.
The brake caliper should be used at no more than 180 degrees.
Replace them when the remaining thickness including the backing plate reaches 10 mm.
The manual specifies replacement every 4 years.