Technical specification sheet for the Sandvik DQ240R, a hydraulically operated, excavator-mounted linear drilling unit for dimensional stone quarries.
The Sandvik DQ240R is a hydraulically operated, excavator-mounted linear drilling unit designed for dimensional stone quarries. It features a rich drilling control system with radio remote control and includes an optional automatic drilling function for single-pass hole automation. The unit comes with a pre-installed and tested installation package to simplify mounting onto an excavator.
Key technical specifications include a hole diameter range of 22-45 mm and a total weight of 1,100 kg for the installation package. The system utilizes a PLC-controlled electro-proportional hydraulics control system with a TA 341 E drilling control system. It is compatible with excavators meeting specific requirements, such as a minimum engine power of 100 kW and a 24 V electric system.
| Hole diameter | 22 - 45 mm (7/8" – 1 3/4") |
|---|---|
| Rock tools | 19 or 22 mm (3/4" or 7/8") |
| Rock Drill power | 5.5 kW |
| Flushing air | 3.5 m3/min, up to 8 bar |
| Total weight (Installation Package) | 1 100 kg |
| Operating pressure | 100 - 180 bar |
| Percussion output power | 5.5 kW |
| Maximum rotation torque | 100 Nm/120 bar |
| Hole depth with starter rod | 2 100 mm |
| Hole depth with second rod | 4 500 mm |
| Single pass drill steel | 2 970 mm |
| Hydraulic Feed extension travel | 600 mm |
| Feed/pull out force | 3.7 kN |
| Frame length | 3 560 mm |
| Drilling length | 3 150 mm |
| Vertical swing | -80°/+80° |
| Horizontal Swing | -30°/+30° |
| Tilt | -35°/+40° |
| Horizontal zoom | 200 mm |
| Min. oil flow for drilling | 250 l/min / 150 bar |
| Min oil flow for boom | 40 l/min / 210 bar |
| Engine power min. | 100 Kw |
| Electric system | 24 V |
| Max. pilot pressure (for remote control) | 30 bar |
| Min. boom lifting capacity | 2900 kg at max reach to the side |
| Dust collector type | DC 710 H |
| Capacity/vacuum | 17 m³ / min at 1000 mm vacuum H2O |
| Total filter surface | 9.6 m² |
| Weight | 1 100 kg (Installation Package) = 3 600 kg |
| Width | 3 470 mm |
| Height | 3 680 mm |
The hole diameter range is 22 - 45 mm (7/8" – 1 3/4").
The total weight of the installation package is 1,100 kg.
The minimum engine power required is 100 Kw.
Yes, drilling single pass holes can be completely automated with the Automatic Drilling option.