The Rohde & Schwarz Scope Rider RTH1002/RTH1004 is a handheld digital oscilloscope with 60–500 MHz bandwidth, 5 Gsample/s sampling, isolated CAT IV…
The Scope Rider series combines a high-performance oscilloscope (60–500 MHz, 5 Gsample/s, 10-bit ADC) with a logic analyzer, protocol analyzer, data logger, and digital multimeter in a rugged, battery-powered handheld. It offers isolated floating channels rated CAT IV 600 V / CAT III 1000 V, a 7-inch capacitive touchscreen, and over 4 hours of battery life for field and lab use.
Two-channel model RTH1002 includes a dedicated 10,000-count DMM, while four-channel model RTH1004 provides a per-channel DVM. Options add MSO logic channels (8 ch, 250 MHz), serial protocol triggering and decoding (I²C, SPI, UART), and segmented memory for 5000 waveforms. The IP51-rated enclosure, glove-friendly buttons, and web-based remote control via WLAN or Ethernet complete the package. This manual is written in Chinese.
| Bandwidth | 60 MHz to 500 MHz |
|---|---|
| Maximum sample rate | 5 Gsample/s |
| Vertical sensitivity | 2 mV/div to 100 V/div |
| ADC resolution | 10-bit |
| Waveform capture rate | 50,000 waveforms/s |
| Input channels (2-ch model) | 2 oscilloscope channels + 1 DMM channel |
| Input channels (4-ch model) | 4 oscilloscope channels with per-channel DVM |
| Maximum input voltage (BNC) | CAT IV 300 V RMS / 424 V peak |
| Maximum input voltage (with isolated probes) | CAT IV 600 V / CAT III 1000 V |
| Memory depth per channel | 500 ksample (1 ch), 250 ksample (2 ch), 125 ksample (4 ch) |
| Timebase range | 1 ns/div to 500 s/div |
| MSO logic channels | 8 channels, 250 MHz bandwidth, 1.25 GSample/s |
| Protocol decoding options | I²C, SPI, UART/RS-232/RS-422/RS-485 |
| Data logger channels | 4 simultaneous channels |
| Data logger sample rate | 1, 2, or 5 measurements/s |
| Data logger memory per channel | 2 Msample |
| DMM resolution (2-ch model) | 10,000 counts |
| DVM resolution (4-ch model) | 999 counts |
| Dimensions (W×H×D) | 201 mm × 293 mm × 74 mm |
| Weight with battery | 2.4 kg (5.3 lb) |
| IP rating | IP51 |
| Display | 7.0" 800×480 color TFT |
| Interfaces | USB Host, USB Device, LAN, WLAN (option) |
| Battery life | >4 hours |
| Safety rating | CAT IV 600 V / CAT III 1000 V |
| Channel isolation | All analog inputs isolated |
The Scope Rider offers 60 MHz to 500 MHz bandwidth depending on model.
It provides CAT IV 600 V / CAT III 1000 V ratings with fully isolated floating channels.
Yes, integrated WLAN or Ethernet allows web-browser-based remote control without additional software.