RKI Instruments FP-30/FP-40 Formaldehyde Gas Detector instruction manual covering operation, detection TAB use, ranges, memory, battery checks, and maintenance.
This instruction manual covers the RKI Instruments FP-30/FP-40 Formaldehyde Gas Detector, including start-up operation, installation of the detection TAB, selection of detection ranges, and the detection cycle. It also explains high-density gas handling, storage of detection results, battery voltage checks, preliminary sample draw, purge cycle, and how to complete detection and power off.
Maintenance sections describe battery replacement, daily and regular checks, replacement of the pump and sensor, and storage after long-term storage. The document also covers storage and handling of detection TABs, specifications, accessories, and spare parts.
| Detection range FP-30 | 0 - 0.4 ppm |
|---|---|
| Detection range FP-30 | 0 – 1.0 ppm |
| Detection range FP-40 | 0 - 0.6 ppm |
| Memory capacity | up to 99 readings |
| Battery count | 4 batteries |
| Pump service life | About 1 year |
| Sensor service life | About 5 years |
Press and hold the ON/OFF switch for about 3 seconds.
The memory can store up to 99 readings maximum.
The pump should be replaced about every 1 year.
The FP-40 uses a 0 - 0.6 ppm detection range with a 3-minute measuring time.