User guide for the Rane AM2 automixer, covering setup, connections, front and rear panels, and operation.
The Rane AM2 is an automixer with eight microphone inputs and a mono main output. It uses a gain-sharing algorithm to mix speech microphones automatically and includes front-panel input and output level controls.
Connections include balanced XLR mic inputs and main output, a RAD port, USB data port, and cascade ports for connecting up to seven additional AM2 units. The mic inputs have fixed 80 Hz low-cut and 7 kHz high-cut filters and support condenser, dynamic, and wireless microphone sources.
| Mic inputs | 8 balanced XLR inputs |
|---|---|
| Main output | Mono balanced XLR |
| Mic input filters | Fixed 80 Hz low-cut and 7 kHz high-cut, 2nd-order Butterworth |
| Phantom power | +48 V for condenser microphones |
| Cascade capacity | Up to 8 AM2 units / 64 microphones |
| Cascade audio | 24-bit, 48 kHz fixed-point |
Up to eight AM2 units can be connected, supporting up to 64 microphones.
The inputs accept dynamic or condenser microphones, or the output of a wireless microphone receiver; condenser mics use the +48 V position.
Adjust each black Input Level control so the loudest speech just barely flickers the red OL indicators.
First try moving the mics farther from the loudspeaker and/or pointing the mics and loudspeakers away from each other; then try turning down amplifier or loudspeaker gain or the Output Level.