Rako Rasoft Pro Wireless Module Setup Guide

Guide to programming Rako wireless lighting modules with Rasoft Pro, covering project files, addressing, wallplates, scenes, and Bridge uploads.


Rako Rasoft Pro Wireless Module Setup Guide - cover page
Brand
rako
Category
lighting
Document type
Programming Manual
Language
English
Pages
26
File format
PDF
File size
1.5 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
5ACDDA737D61CC894661DB7050D98055

About this manual

This Rako guide explains how to program a wireless lighting system using Rasoft Pro software, available for download at rakocontrols.com/rasoftpro. It walks through creating a new project file, adding rooms and channels, connecting a communication device, and addressing modules.

It also covers setting up RCM wall-plates with dip switches and programmable RNC wall-plates, setting scenes and fade rates, and uploading programming data to a Bridge for the Rako App.

What's inside

  • What you need to get started
  • Create a new Rasoft Pro Project File
  • Connecting to a communication device
  • Addressing modules
  • Setup for wall-plates with dip switches (RCM)
  • Setting up a programmable wallplate (RNC)
  • Setting scenes
  • Fade rates
  • Uploading to a Bridge and App setup

Specifications

SoftwareRasoft Pro
Communication device optionsRAUSB/RAMPI or Bridge Module
User levelsBeginner, intermediate and expert
Default House number1
Reserved room number255

Frequently asked questions

What software is used to program a Rako system?

Rasoft Pro is the programming software used for the system; the guide says it is available for download at rakocontrols.com/rasoftpro.

What communication device can connect Rasoft Pro to the system?

A RAUSB/RAMPI or a Bridge Module can be connected to a laptop or Mac.

How do I put a module with a button into setup mode?

Press and hold the module button until the internal LED flashes periodically, then release it while it continues flashing.

Why should the default House number 1 not be used?

The factory default House number is 1, and the guide recommends not using it to avoid interference with other systems on the default address.

Download PDF (1.5 MB)

More rako Manuals


View all rako manuals →