R Protection Systems 2320 Fire/Suppression Control Panel Product Leaflet

Leaflet for the R Protection Systems 2320 control panel that supervises and controls one fire suppression hazard, with features, releasing devices and specs.


R Protection Systems 2320 Fire/Suppression Control Panel Product Leaflet - cover page
Brand
R Protection Systems
Category
Monitoring Equipment
Document type
Product Leaflet
Language
English
Pages
2
File format
PDF
File size
1 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
59CF3BCB2DB5B2B9DDBAD8C97DAA1027

About this manual

The 2320 is a low cost control panel from R Protection Systems, a UTC Fire & Security company, that supervises and controls one fire suppression hazard. Microprocessor technology is used for reliability and field programmable versatility, and the unit is compatible with Fenwal FM-200 clean agent suppression systems. It meets the requirements of NFPA 72 and is approved for use in suppression systems covered by NFPA codes 12, 12A, 17, 17A and 2001.

The panel provides 14 indicating status LEDs and 5 diagnostic LEDs. Field programmable options include multiple time delays, 3 abort modes, single or cross zone operation, release circuit isolation and a second alarm relay. Two independent style "B" initiating circuits can be programmed for single or cross zone application, and the 24 Vdc power supply is provided for either 120 or 240 Vac input with electronic overload protection and a built-in battery charger. The leaflet closes with ordering information and specifications.

What's inside

  • Description
  • Features
  • Indicating Status and Diagnostic LEDs
  • Programmable Options and Abort Modes
  • Initiating and Input Circuits
  • Releasing Devices
  • Ordering Information
  • Specifications

Specifications

Input Power120 or 240 Vac, 0.25 Amp maximum
Standby Current35 mA
Alarm Current200 mA
Auxiliary Power0.25 amps @ 24 Vdc in alarm only
Input CircuitsTwo style "B", 50 ohms, 10K EOL
Output CircuitOne style "Y", 0.5 Amp @ 24 Vdc, 10K EOL
Relay OutputsTwo alarm, one trouble, form "C", rated 2 Amp @ 24 Vdc
Initiator OutputUp to six P/N 93-191001-001 or up to ten P/N 31-199932-004
Time Delay to Discharge (detectors only)Field selectable 0 to 30 seconds in 10 second increments
Standby BatteryOptional 1.2 AH batteries give 24 hours standby plus five minutes alarm
Nominal Dimensions13-1/4 in. H x 11 in. W x 2-5/16 in. D

Frequently asked questions

What is the R Protection Systems 2320 control panel used for?

It supervises and controls one fire suppression hazard, and the control unit is compatible with Fenwal FM-200 clean agent suppression systems.

Which releasing devices can the control unit activate?

One or two 24 Vdc solenoid control heads such as P/N 890181 or P/N 48650001, or sets of electro-explosive initiators, for example up to ten P/N 31-199932-004.

What abort modes are programmable?

Mode 1 holds the timer at 10 seconds and counts down upon abort release, Mode 2 resets the timer to its initial value, and Mode 3 holds at 10 seconds if actuated before the 2nd alarm (IRI).

What listings does the 2320 carry?

The features list gives UL, FM, ULC, MEA and CSFM.

Download PDF (1 MB)