Parts and service manual for Power Gear hydraulic leveling systems with touch pads, covering components, fluids, maintenance, operation, wiring, and…
This manual is for Power Gear hydraulic leveling systems with touch pads, including manual, semi-automatic, and automatic touch pad versions with spring return jacks. It describes the system components, recommended hydraulic fluids, preventive maintenance, and general operating instructions.
It also covers metal and plastic tank hydraulic pump assemblies, hose identification, hydraulic fittings, touch pad and control box connections, wiring diagrams, a troubleshooting guide, and warranty information.
| Jack shoe size | 10 in diameter (78.5 sq in) |
|---|---|
| Minimum control voltage | 13.1 VDC |
| Recommended fluid (general) | Type A ATF (Dexron III) |
| Alternative fluid | Mercon V |
| Cold-weather fluids | Mobil DTE 11M, Texaco Rando HDZ-15HVI, Kendall Hyden Glacial Blu, Mil. Spec. H5606 |
| Fluid level check interval | Every month |
| Fluid change interval | Every 24 months |
| Electrical connection inspection interval | Every 12 months |
| Chrome rod lubrication interval | Every 7 days (every 2-3 days within 60 miles of coast) |
| Grease fitting lubrication | 2-3 pumps every 20-30 uses |
| Jacks down light delay after retraction | 20-30 seconds |
Type A ATF (Dexron III) works satisfactorily, Mercon V is an alternative, and Mobil DTE 11M, Texaco Rando HDZ-15HVI, Kendall Hyden Glacial Blu, or Mil. Spec. H5606 are recommended for cold weather.
The fluid should be changed every 24 months.
Some controls require a minimum of 13.1 VDC.
The jacks down light turns off within 20-30 seconds.
No; using a high-pressure wash/rinse system on leveling system components voids the warranty.