User manual for the Philips BT1300 Bluetooth speaker, covering setup, charging, Bluetooth pairing, playback, specifications, and troubleshooting.
The Philips BT1300 is a Bluetooth speaker that can play audio from Bluetooth devices or external audio devices through the AUDIO IN jack. It is powered by a built-in rechargeable lithium polymer battery and includes a USB charging cable and carrying strap.
This user manual covers important safety notes, speaker controls, charging, power on/off, Bluetooth pairing and call controls, external audio playback, volume adjustment, product specifications, troubleshooting, and environmental notices. This manual is written in Chinese.
| Rated output power | 2 W RMS |
|---|---|
| Frequency response | 80 -16000 Hz, ±3 dB |
| Signal-to-noise ratio | >70 dBA |
| Speaker impedance | 4 ohms |
| Speaker driver | 4.5 cm full range |
| Sensitivity | >81 dB/m/W ±3 dB/m/W |
| Bluetooth version | V3.0 |
| Bluetooth profiles | HFP, HSP, A2DP |
| Bluetooth frequency band | 2.4 GHz ~ 2.48 GHz |
| Bluetooth range | 10 m (free space) |
| Power supply | 5 V 0.5 A via USB jack |
| Built-in battery | Lithium polymer battery (3.7 V, 500 mAh) |
| Dimensions - main unit | 55 x 55 x 55 mm |
| Weight - main unit | 0.1 kg |
The speaker can remember up to 4 paired devices.
Enter the pairing password 0000 if the device asks for one.
The operating range between the speaker and a Bluetooth device is about 10 m (30 ft).
Slide the OFF/AUDIO IN/Bluetooth switch to OFF.