Product manual for the ONV ONV-IoT9000 IoT smart O&M cabinet, covering installation, grounding, lightning protection, and first login via Web or Console.
This product manual covers the ONV ONV-IoT9000, an IoT smart operation and maintenance cabinet from Shenzhen ONV Technology (光网视). The cabinet uses a modular interior design that can be configured to project needs, supports outdoor pole mounting, and can carry a managed PoE switch module for network transmission; cabinets without a switch module skip the switch configuration steps.
The manual explains safety precautions, installation environment and grounding requirements, lightning protection wiring rules, and pre-debugging to be completed before the cabinet is mounted on the pole. It then describes first-time login through the Web interface (192.168.2.1, default admin/system) or the Console port (115200 bps, 8 data bits, no parity), cabinet installation and cabling, post-installation checks, the packing list, and ONV after-sales support contacts. This manual is written in Chinese.
| Grounding resistance | ≤ 10 Ω |
|---|---|
| Default Web login address | 192.168.2.1 |
| Default username / password | admin / system |
| Console port default parameters | 115200 bps, 8 data bits, no parity, 1 stop bit, no flow control |
| Internal AC output power | 110/220VAC with breaker, voltage regulation, surge protection and auto-reclosing |
| Power input voltage range | AC170V–265V |
| Fiber splicing capacity | Bare fiber up to 20 m per fiber; pigtail up to 1 m per fiber |
| EMC class | Class A |
| Mounting | Outdoor pole mounting, vertical round poles only |
Set the computer to the same subnet as the switch, enter 192.168.2.1 in the browser, and log in with the default username admin and password system.
115200 bps transmission rate, 8 data bits, no parity, 1 stop bit and no flow control.
No, the Console cable is not shipped with the device and must be purchased separately.
The cabinet must be grounded before power-on, and the grounding resistance of the installation environment must not exceed 10 Ω.