MTS Sensors Temposonics EH IO-Link Magnetostrictive Linear Position Sensor Data Sheet

Data sheet for the MTS Sensors Temposonics EH IO-Link magnetostrictive linear position sensor, with technical data, drawings, order codes and accessories.


MTS Sensors Temposonics EH IO-Link Magnetostrictive Linear Position Sensor Data Sheet - cover page
Brand
MTS Sensors
Category
sensor
Document type
Datasheet
Language
English
Pages
7
File format
PDF
File size
1.3 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
20A6549F59FBF1021547CE5001696662

About this manual

This data sheet covers the MTS Sensors Temposonics EH IO-Link, a compact rod-style magnetostrictive linear position sensor designed for direct stroke measurement in small hydraulic cylinders. The position magnet mounted on the piston head travels over the sensor rod with the built-in waveguide, giving a precise, non-contact and wear-free measurement.

The EH with IO-Link allows parameters such as measuring direction, resolution or offset to be adjusted, and a switching state can be output in parallel with the position value. The sheet provides technical data, a technical drawing with connector wiring, position magnet and cord set options, frequently ordered accessories and the order code structure.

What's inside

  • Measuring technology
  • Technical data
  • Technical drawing
  • 4 pin connector wiring
  • Position magnets
  • Frequently ordered accessories
  • Order code
  • Delivery

Specifications

Output interfaceDigital, IO-Link V1.1
Data format32 bit signed (position in μm)
Data transmission rateCOM3 (230.4 kBaud)
Resolution15 µm, 10 µm, 20 µm, 50 µm or 100 µm
Cycle timeminimum 1 ms (master dependent)
Linearity≤ ±0.02 % F.S. (minimum ±60 μm)
Repeatability≤ ±0.005 % F.S. (minimum ±20 μm)
Operating temperature-40…+75 °C (−40…+167 °F)
Ingress protectionIP67
Stroke length50…2540 mm (2…100 in.)
Operating pressure300 bar (4351 psi), 450 bar (6527 psi) peak
Operating voltage+24 VDC (±25 %)
Connection typeM12 (4 pin) male connector
Shock test100 g (single shock)
Vibration test15 g / 10…2000 Hz

Frequently asked questions

What measuring principle does the Temposonics EH use?

It uses MTS Sensors' proprietary Temposonics magnetostrictive time-of-flight principle: a current pulse in the waveguide interacts with the position magnet's field, releasing a torsional strain pulse whose travel time is converted into position.

What can be adjusted via IO-Link on the EH sensor?

Parameters including measuring direction, resolution or offset can be adjusted, and a switching state can be output in parallel with the position value; switching points and logic can be parameterized.

Which position magnets are offered for the EH?

Standard ring magnet 201 542-2, ring magnet OD25.4 (400 533), ring magnet OD17.4 (401 032) and U-magnet OD33 (251 416-2).

What is the stroke length range of the EH sensor?

The stroke length range is 50…2540 mm (2…100 in.).

Download PDF (1.3 MB)