MRC Systems Beamblock Laser Shutter System User Manual

User manual for the MRC Systems Beamblock laser shutter system: installation, operating modes, specifications and safety notes.


MRC Systems Beamblock Laser Shutter System User Manual - cover page
Brand
MRC Systems
Category
Other
Document type
User Manual
Language
English
Pages
5
File format
PDF
File size
729 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
220C4F9F7E28895F866DA7A0271BAE72

About this manual

The Beamblock laser shutter system from MRC Systems is designed for blocking high power laser beams. It consists of a laser shutter and a shutter controller that drives the shutter in different modes of operation, either automatically by other devices or semi-manually with a safety confirmation by the user. The input for external signals is prepared for standard TTL levels, and the system was developed especially for use with the laser beam stabilization Compact or Dynamic, where it blocks the beam when the stabilization cannot align it.

The manual (version 2, 03.05.2011) describes the shutter controller and shutter installation, the orientation of the shutter in the beam path, the three modes of operation (confirm, external and manual), the technical specification of the shutter and controller, safety notes, customised solutions and contact details.

What's inside

  • General description
  • Installation – shutter controller
  • Installation – shutter
  • Shutter modes of operation
  • Confirm mode
  • External mode
  • Manual mode
  • Specification
  • Safety
  • Customised solutions

Specifications

Shutter optical aperture10 mm
Shutter mountingM6 thread
Shutter length/width/height55 mm / 38 mm / 50 mm
Shutter weight190 g
Shutter cable length1.5 m
Shutter connectorLEMO 00
Input "OK / external"Logic / TTL-level, LEMO 00
Output "Shutter"0 V / 12 V, LEMO 00
Power supply5.5 mm coaxial socket, 12 V / 400 mA
Controller length/width/height90 mm / 58 mm / 38 mm
Controller weight120 g
Shutter speed to unblock the laser beam15 ms
Shutter speed to block the laser beam48 ms
Power consumption (shutter opened)400 mA / 12 V

Frequently asked questions

What is the Beamblock laser shutter system used for?

It is designed for blocking high power laser beams and consists of a laser shutter and a shutter controller.

How is the shutter controller connected to a laser beam stabilization system?

The delivered LEMO cable is inserted in the output "OK" of the stabilization system and in the input "OK / external" of the shutter controller.

How fast is the shutter when blocking the laser beam?

The shutter speed to block the laser beam is 48 ms.

What power supply does the shutter controller need?

It uses a 12 V / 400 mA wall power supply connected to the 5.5 mm coaxial socket labelled "12V".

Download PDF (729 KB)

More MRC Systems Manuals


View all MRC Systems manuals →