MRC Systems 12M newSensor MR-Compatible Camera User Manual

User manual for the MRC Systems 12M newSensor MR-compatible camera covering components, mounting, filter box installation, connections and technical data.


MRC Systems 12M newSensor MR-Compatible Camera User Manual - cover page
Brand
MRC Systems
Category
medical technology
Document type
User Manual
Language
English
Pages
8
File format
PDF
File size
1 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
2B5933B2EFE4831A4F1C4F46A899B7EE

About this manual

The MRC Systems 12M newSensor is an MR-compatible video camera designed to view and record video images of subjects in an MR scanner and to monitor objects and instruments. It can be used inside the bore of the scanner with different exchangeable lenses, and is tested in MR scanners with static fields of up to 7T.

The manual describes the system components, including the camera, filter box, camera connection cable, power supply, BNC cable and earth ground cable. It explains lens mounting, mounting options, connection to the filter box, filter box installation, power supply and video connections, maintenance and technical data.

What's inside

  • Intended use
  • System components
  • Video camera and lens
  • Mounting options
  • Connection of camera to filter box
  • Filter box installation
  • Connection of power supply
  • Maintenance and cleaning
  • Technical data
  • Accessories

Specifications

SensorColor CMOS, 1/4 inch; active sensor size 4.1 x 3.1 mm
Video outputNTSC 60 Hz half frame rate or PAL 50 Hz half frame rate
Housing dimensions28 x 18 mm; height 23 mm + lens (with mounting bracket)
Weight22 g
Lens connector12 x 0.5 mm mount
Power supply200 mA, 5.9-6.3 V DC
Filter box dimensions80 x 120 x 80 mm
Filter box weightapprox. 700 g
Filter attenuationLow pass filter suppresses frequencies above 1 MHz with over 100 dB
Optical isolationOptical isolation of the video signal
Camera connection cable length10 m (2 m at camera + 8 m elongation cable)
MR static fieldTested in MR scanners with static fields up to 7T

Frequently asked questions

What is the 12M newSensor camera intended for?

It is designed to view and record video images of subjects in an MR scanner and can also be used to monitor objects and instruments.

Where should the filter box be installed?

The filter box should be mounted at the filter panel board of the MR room and placed outside the MR room.

How is the lens focus adjusted?

Focus is adjusted by screwing the lens in and out, taking care not to screw it out too far.

What video outputs does the camera provide?

It provides an NTSC video signal with 60 Hz half frame rate or a PAL video signal with 50 Hz half frame rate.

Download PDF (1 MB)