MEIRUIKE RK9914 Series Program-Controlled AC/DC Withstand Voltage Tester User Manual

User manual for the MEIRUIKE RK9914 Series AC/DC withstand voltage tester, covering safety, installation, operation, parameter settings, serial commands…


MEIRUIKE RK9914 Series Program-Controlled AC/DC Withstand Voltage Tester User Manual - cover page
Brand
MEIRUIKE
Category
Test Set
Document type
User Manual
Language
Chinese
Pages
55
File format
PDF
File size
2.9 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
515D97263F698EA509C9D311F63D14EC

About this manual

The MEIRUIKE RK9914 Series is a program-controlled AC/DC withstand voltage tester. The user manual covers installation and use, operating precautions, front and rear panel descriptions, operation steps, parameter settings, system settings, test function principles, and HANDLER/SIGNAL interface circuits.

It also documents the serial command set, including SCPI and subsystem commands, and provides instrument specifications and a packing list. Safety warnings cover grounding, electric shock, high-voltage testing, input power, and use in explosive or corrosive environments. This manual is written in Chinese.

What's inside

  • Installation and Use
  • Operating Precautions and Measures
  • Instrument Panel Overview
  • Operating Instructions
  • Parameter Setting Mode
  • System Setting Mode
  • Test Function Principles and Use
  • HANDLER and SIGNAL Interface Circuits
  • Serial Command Set
  • Technical Specifications and Packing List

Specifications

Rated power300 VA
Power consumptionLess than 300 VA
Dimensions (W × H × D)350 mm × 110 mm × 430 mm
WeightApproximately 15 kg
Input voltage and frequency110 V or 220 V; 47–63 Hz
Operating humidity20% to 80% RH, no condensation
Storage humidityLess than 90% RH, no condensation
Safety standardGB4793.1-2007 / IEC61010-1:2001

Frequently asked questions

What should I do in an emergency if the instrument does not stop high-voltage output?

Turn off the instrument's power switch and unplug the power cord from the outlet; both actions must be performed.

What are the operating humidity limits?

The instrument may be used at 20% to 80% RH, with no condensation allowed.

What grounding method does the manual require?

The instrument must be connected to electrical ground, either through a grounded three-wire power outlet or by connecting the rear protective terminal to earth.

Download PDF (2.9 MB)

More MEIRUIKE Manuals


View all MEIRUIKE manuals →