LeiShen LS01B2 is a 2D low-cost laser scanner with 360° scanning, a 16 m range, 0.25° angular resolution and UART output for SLAM and navigation.
The LS01B2 is a 2D low-cost ranging scanner developed by LeiShen Intelligent System Co., Ltd. It performs a 360-degree laser scan within a 16-meter detection range and produces a 2D point cloud data map used for mapping navigation (SLAM), obstacle avoidance and route planning. The sampling rate and scan rate are adjustable, with a default sampling rate of 14,400 points per second, a 10 Hz scan frequency and 0.25° angular resolution. It uses LeiShen's laser triangulation system and is described as functioning in indoor environments under 25,000 Lux sunlight.
The scanner is made up of a high-frequency ranging core module, a wireless transmission system and a mechanical spinning module driven by a brushless stepper motor. Its signal wire connects directly to a UART interface of FPGA/DSP/ARM/SCM without RS232 or RS422 transition, and the standard configuration uses a 3.3 V UART at 460,800 bps; USB or Bluetooth can be used instead. The unit includes rotation-speed detection and a motor speed-stabilizing algorithm. A Class 1 infrared laser emitter below 1 mW is used, with protection that stops laser output and scanning if limits are exceeded. SDK kits for Linux, Windows and ROS are available.
| Detection Range | 0.20 to 16 m at 70% reflectivity |
|---|---|
| Scan Frequency | 3 to 10 Hz, 10 Hz typical; customizable |
| Angular Resolution | 0.25° typical, adjustable from 0.25° to 1° |
| Sampling Rate | 14,400 points per second default |
| Laser Wavelength | 792 nm typical, 788 to 794 nm at 25°C |
| Laser Power | 0.68 to 1 mW average power, Class 1 eye safe |
| Distance Accuracy | Less than 10 mm within 1 m; less than 1% of measured distance from 1 to 15 m; less than 2% above 15 m |
| Weight | 180 g |
| Operating Temperature | 0 to 45 °C, 25 °C typical |
| Storage Temperature | -10 to 50 °C |
| Communication Interface | Standard 3.3 V voltage-level UART at 460,800 bps; optional USB or Bluetooth |
| Supply Voltage | 5 V typical, 4.5 to 5.5 V for ranging core module and motor |
It performs a 360-degree laser scan within a 16-meter detection range, with a 0.20 to 16 m distance range at 70% reflectivity.
The default sampling rate is 14,400 points per second, with a 10 Hz scan frequency and 0.25° angular resolution.
The standard configuration uses a 3.3 V voltage-level UART serial port at 460,800 bps; it can be changed to interfaces such as USB or Bluetooth.
Applications include navigation and localization of common robots, unmanned aerial vehicle navigation and obstacle avoidance, cleaning and indoor service robots, and SLAM algorithms.