User manual for the Kepware Mitsubishi FXDriver software, which connects Mitsubishi FX series devices to OPC client applications.
The Mitsubishi FXDriver from Kepware is a software driver that connects Mitsubishi FX series devices to OPC client applications such as HMI, SCADA, historian, MES, ERP, and custom applications. It is intended for use with Mitsubishi FX series devices and supports the FX, FX0, FX0N, FX2N, and FX3U models.
The manual covers setup, channel properties, device properties, modem setup, data types, address descriptions for FX, FX0, FX0N, FX2N, and FX3U addressing, event log messages, error mask definitions, and Ethernet encapsulation examples. It notes that FX3U is not supported in Windows CE and that Ethernet Encapsulation is not supported by the FX3U model.
| Supported Device Models | FX, FX0, FX0N, FX2N, FX3U |
|---|---|
| Communication Protocol | Direct Serial |
| Baud Rate | 9600 |
| Parity | Even |
| Data Bits | 7 |
| Stop Bits | 1 |
| Maximum Channels | 256 |
| Maximum Devices per Channel | 100 |
| Ethernet Encapsulation Capacity | Up to 100 controllers per channel |
The driver supports the FX, FX0, FX0N, FX2N, and FX3U models.
The stated parameters are 9600 baud, even parity, 7 data bits, and 1 stop bit.
The maximum number of devices per channel is 100.
Yes. The driver supports Ethernet Encapsulation and can communicate with serial devices attached to an Ethernet network using a terminal server.