KACON KC91 color mark sensor leaflet: 9 mm teaching distance, 2 mm spot, white LED light source, NPN/PNP output, 12~24V DC, IP67, with key teaching steps.
This single-page KACON document presents the KC91 color mark sensor with its specification table, dimension and connection diagrams, and a key-configuration guide. Listed ratings include a 9 mm ± 0.5 mm teaching distance, a 2 mm spot diameter, a white LED light source, a 12~24V DC ± 10% power supply and maximum 600 mW power consumption at 24V DC with 20 mA.
The sensor offers NPN output on the black cable and PNP output on the white cable, a 100 mA load current, 2 V max residual voltage, a 3-digit FND indicator and a maximum 15 ms response time. Settings are made with a GRAY KEY for parameter setting and a BLUE KEY for color teaching; the leaflet describes color teaching, color balance, output NO/NC selection, key lock and factory reset, plus warnings such as mounting the sensor at 10°~20° for glossy objects.
| Teaching distance | 9 mm ± 0.5 mm |
|---|---|
| Spot diameter | 2 mm |
| Light source | White LED |
| Power supply voltage | 12~24V DC ±10% |
| Power consumption | Maximum 600 mW at 24V DC with 20 mA |
| Control output | NPN output: black cable; PNP output: white cable |
| Load current / residual voltage | 100 mA; 2 V max |
| Indicator | 3 digit FND |
| Response time | Maximum 15 ms |
| Ambient illumination | Indoor lamp 3,000 lx max; sunlight 10,000 lx max |
| Degree of protection | IP67 (IEC) |
| Cable | 2 m PVC cable (RoHS) |
| Vibration resistance | 10 to 55 Hz, 1.5 mm double amplitude for 2 h each in X, Y, Z |
| Shock resistance | 500 m/s² for 3 times each in X, Y and Z directions |
| Standard sensing object color (Munsell) | White (N9.5), Black (N2.0), Red (4R 4.5/12.0), Blue (3PB 5.0/10.0), Green (3G 6.5/9.0) |
The sensor must be fixed at a 9 mm ± 0.5 mm distance from the target color.
The BLUE KEY performs color teaching; it is held for 3 seconds until the display indicates the teaching state.
The response time is a maximum of 15 ms, with a 2 mm spot size.
The sensor is rated IP67 according to IEC, and comes with a 2 m PVC cable.
Mount the sensor at an angle of 10° to 20°, as shown in the diagrams of the document.