User manual for the HyperX Cloud MIX wired gaming headset with Bluetooth, covering setup, controls, charging, and specifications.
HyperX Cloud MIX is a wired gaming headset with Bluetooth that includes a detachable microphone, in-line controller, and 3.5mm and USB cables. The manual covers product overview, specifications, wired and wireless setup, Bluetooth controls, charging, LED indicators, and factory reset.
The headset has 40mm drivers, a 20-hour Bluetooth battery life, and Bluetooth 4.2 with up to 10 metres of wireless range. Charging takes approximately 3 hours, and controls include volume, mute, media, calls, and voice assistant functions.
| Headphone driver | Custom dynamic, 40mm with neodymium magnets |
|---|---|
| Headphone type | Circumaural, closed back |
| Headphone frequency response | 10Hz–40,000Hz |
| Sound pressure level | 100dBSPL/mW at 1kHz |
| Detachable headset cable length | 1.3m |
| PC extension cable length | 2m |
| USB charging cable length | 0.5m |
| Detachable headset cable connection | 3.5mm plug (4 pole) |
| PC extension cable connection | 3.5mm stereo and mic plugs |
| Boom microphone element | Electret condenser microphone |
| Boom microphone polar pattern | Noise-cancelling |
| Boom microphone frequency response | 50Hz-18,000 Hz |
| Boom microphone sensitivity | -42dBV (0dB=1V/Pa,1kHz) |
| Built-in microphone polar pattern | Omni-directional |
| Built-in microphone frequency response | 50Hz-8,000 Hz |
| Built-in microphone sensitivity | -33dBV (0dB=1V/Pa,1kHz) |
| Bluetooth battery life | 20 hours |
| Wireless range | Up to 10 metres / 33 feet |
| Charging time | Approximately 3 hours |
The headset takes approximately 3 hours to charge fully.
With the headset turned off, press and hold the power button for 5 seconds until the LED flashes red and blue, then connect to HyperX Cloud MIX on your device.
Hold the power button and volume up button together for 7 seconds.
It indicates that the microphone is muted.