Huawei SUN2000 (29.9KTL, 33KTL-A, 36KTL, 42KTL) inverter quick guide covering installation conditions, mounting, ports, and electrical connections.
This quick guide covers the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) inverter. It starts with safety and delivery checks, then shows the front ports, installation angle and clearance, and mounting on the bracket.
The guide then lists cable and terminal requirements for ground, AC output, DC input, RS485 and FE connections, including supported 3W+PE and 3W+N+PE modes and grounding notes. This manual is written in French.
| AC output cable cross-section (SUN2000-29.9KTL/33KTL-A) | 16 mm² copper outer cable |
|---|---|
| AC output cable cross-section (SUN2000-36KTL/42KTL) | 25 mm² copper outer cable |
| DC input cable | PV1-F/4 mm² |
| RS485 cable | DJYP2VP2-22 2x2x1 |
| Ground terminal | OT M6 |
| AC output terminal | OT M8 |
| Mounting bolt torque | 45 Nm for M12 |
| Recommended clearance above inverter | 600 mm to 730 mm |
Contact the dealer.
Only qualified and trained technicians who understand grid-connected photovoltaic systems and local standards.
The SUN2000-42KTL supports the 3W+PE connection mode.
A clear space of at least 600 mm and no more than 730 mm is recommended.