Installation and operation guide for HTC393 electric towel warmer with wiring, mounting, and safety instructions.
This manual provides step-by-step instructions for installing the HTC393 electric towel warmer, including tools needed, wall drilling, wiring connections, and mounting the unit. It also covers temperature control, timer settings, and safety precautions for proper use and maintenance.
The product requires a wall-mounted installation with pre-buried wiring, using a 86-type junction box at 600–1200mm height. Wiring must be correctly connected to ground, live, and neutral wires, and the unit must be secured with screws and expansion anchors. Temperature can be adjusted via a rotary knob, and a timer function is available for 0.5–6 hours. This manual is written in Chinese.
| Mounting Height | 600mm~1200mm |
|---|---|
| Wiring Colors | Blue (Neutral), Brown (Live), Green/Yellow (Ground) |
| Mounting Hole Spacing | 150mm center-to-center |
| Timer Range | 0.5 to 6 hours |
The recommended mounting height is 600mm to 1200mm from the floor, but this can be adjusted based on personal preference.
It is for drying towels only.
The default setting temperature is 50℃.
The timer can be set from 0.5 to 6 hours.