User manual for the HK Series dial-setting time relay, covering panel controls, parameter setting, wiring, model designations, and dimensions.
The HK Series is a dial-setting time relay that uses an imported high-performance chip as its main controller and multiple anti-interference circuits. It supports dial and button setting, retention of the timing value after power loss, up/down timing, dual delay, eight timing ranges, six output delay ranges, and a bright LED display.
The manual describes panel controls, parameter setting, operating instructions, wiring, model designations, output logic diagrams, and dimensions. It also lists specifications including 100–240 VAC 50/60 Hz power, <3 W power consumption, 250 VAC/3 A resistive-load contacts, and an operating temperature of 0°C to +50°C. This manual is written in Chinese.
| Power supply | 100–240 VAC, 50/60 Hz |
|---|---|
| Contact load | AC 250 V / 3 A (resistive load) |
| Timing ranges | 0.01S–99.99S; 0.1S–999.9S; 0.01M–99.99M; 0.1M–999.9M; 0.01H–99.99H; 0.1H–999.9H; 1S–99M59S; 1M–99H59M |
| Output delay ranges | 0.1S–999.9S; 0.1M–999.9M; 0.1H–999.9H |
| Operating temperature and humidity | 0°C to +50°C (non-freezing); 35–85% RH |
| Mechanical life | 5 million operations or more |
| Electrical life | 100,000 operations within rated load |
It uses 100–240 VAC at 50/60 Hz.
The contact load is AC 250 V/3 A for resistive loads.
In measurement mode, press MOD and RST together; the range and unit can be changed only when LCK is set to 0055.
HK□B is a multifunction relay alarm instrument with menu setting and power-failure memory.