Application manual for the Hitachi NJI-281H (X) programmable controller, covering safety, specifications, installation, programming, operation, and…
This manual is for the Hitachi NJI-281H (X) programmable controller. It includes safety precautions, warranty and repair information, general and function specifications, product lineup details, command and I/O specifications, programming, PLC operation, installation, wiring, communication, troubleshooting, and inspection guidance.
The document also lists error codes, special internal outputs, operation examples, and appendix material such as cable connection diagrams and command support comparisons.
| AC receiving power | 100/110/120 V AC (50/60 Hz), 200/220/240 V AC (50/60 Hz) |
|---|---|
| DC receiving power | 24 V DC |
| Power voltage fluctuation range | 21.6 to 26.4 V DC |
| Allowable instantaneous power failure | 85 to 100 V AC: less than 10 ms; 100 to 264 V AC: less than 20 ms |
| Operating ambient temperature | 0 to 55 °C (storage -10 to 75 °C) |
| Operating ambient humidity | 20 to 90 % RH (no condensation) |
| Vibration resistance | Conforms to JIS C 0911 (16.7 Hz double amplitude 3 mm X, Y and Z each direction) |
| Noise resistance | Noise voltage 1,500 Vpp; pulse width 100 ns, 1 µs; static noise 3,000 V at metal exposed area |
| Insulation resistance | 20 MΩ or more |
| Dielectric withstand voltage | 1,500 V AC for 1 minute |
| Grounding | Class D grounding (ground with power supply module) |
| Usage environment | No corrosive gases, no excessive dust |
| Structure | Open, wall-mounted type |
| Cooling | Natural air cooling |
The warranty period is the shorter of 18 months from the date of manufacture or 12 months from the date of installation.
No, any examination or repair after the warranty period is not covered.
Always perform grounding at the FE terminal.