Hach STABLCAL Stabilized Formazin Turbidity Standards Instruction Manual

Instruction manual for Hach STABLCAL stabilized formazin turbidity standards, covering storage, handling, use, and catalog numbers.


Hach STABLCAL Stabilized Formazin Turbidity Standards Instruction Manual - cover page
Brand
HACH
Category
Chemical products
Document type
User Manual
Language
German
Pages
44
File format
PDF
File size
451 KB
Published
15 November, 2026
Updated
15 November, 2026
MD5 checksum
953C4D54A3B3EC28F663ED1B3D89884C

About this manual

Hach STABLCAL stabilized formazin turbidity standards are used with turbidimeters. This manual covers storage and handling, rare and frequent use procedures, special handling for standards below 0.1 NTU, and required reagents.

The standards are available as sealed ampoules or bottles in many turbidity values. Storage is specified between 5 and 25 °C, with 5 °C for storage longer than one month, and temperatures above 40 °C and direct sunlight should be avoided. This manual is written in German.

What's inside

  • Storage and handling of StablCal standard solutions
  • Instructions for use
  • Instructions for rare use of StablCal standards
  • Instructions for frequent use of StablCal standards
  • Instructions for StablCal standards below 0.1 NTU
  • Required reagents
  • StablCal stabilized formazin turbidity standard solutions
  • StablCal bottle sets

Specifications

Storage temperature5 to 25 °C
Long-term storage temperature5 °C for storage over one month
Maximum temperature40 °C must not be exceeded
Available turbidity valuesBelow 0.1 to 7500 NTU
PackagingSealed ampoules or bottles

Frequently asked questions

How should StablCal standards be stored?

Store them between 5 and 25 °C; for storage longer than one month, store at 5 °C. Avoid temperatures above 40 °C and direct sunlight.

Can used standard solution be returned to the original container?

No, never return used standard solution from the analysis cuvette to the original container.

How are rarely used StablCal standards prepared?

Invert the bottle several times for 2 to 3 minutes, let it stand for 5 minutes, then invert it again before filling the cuvette.

How should a standard below 0.1 NTU be handled?

Do not shake or invert it; let it stand, pour it carefully along the cuvette wall, close the cuvette and bottle immediately, then let it stand 2 to 3 minutes.

Download PDF (451 KB)

More HACH Manuals


View all HACH manuals →