Greenlee 776 Ratchet ACSR Cutter User Manual

User manual for Greenlee 776 Ratchet ACSR Cutter, covering safe operation, maintenance, disassembly, and assembly procedures.


Greenlee 776 Ratchet ACSR Cutter User Manual - cover page
Brand
Greenlee
Category
Other
Document type
User Manual
Language
Chinese
Pages
14
File format
PDF
File size
1.9 MB
Published
09 November, 2026
Updated
09 November, 2026
MD5 checksum
1D2323B4AB65AD6CA59FE9558101FBA8

About this manual

This manual provides instructions for safely operating and maintaining the Greenlee 776 Ratchet ACSR Cutter, a non-insulated tool designed to cut ACSR cable up to 636 kcmil. It includes safety warnings, specifications, operation steps, and detailed disassembly and reassembly procedures. The tool features fiberglass handles and rubber grips for operator comfort and is not intended for cutting guy wire or steel rod.

Maintenance guidance covers cleaning, lubrication, and periodic inspection to ensure safe and efficient performance. Lubrication points are specified, and users are instructed to use Molykote or equivalent lubricants. Safety precautions emphasize two-handed operation, eye protection, and avoiding contact with live electrical lines. This manual is written in Chinese.

What's inside

  • Description
  • Purpose of this Manual
  • Important Safety Instructions
  • Identification
  • Specifications
  • Operation
  • Maintenance General
  • Cleaning the cutter
  • Lubricating the cutter
  • Disassembly

Specifications

Mass/Weight2.8 kg (6.2 lb)
Length505 mm (19.87")
Width at blades127 mm (5.0")
Thickness68.5 mm (2.7")
Jaw opening (minimum)29 mm (1.15")
Handle force at Maximum Capacity267 N (60 lb)
Capacitycuts ACSR through 636 kcmil with steel core diameter less than 0.32"

Frequently asked questions

What is the maximum cable size this cutter can handle?

It cuts ACSR through 636 kcmil with steel core diameter less than 0.32".

How do I lubricate the cutter?

Apply Molykote lubricant or equivalent between the blades, on the teeth of the holding and drive pawls, and on the pivot shoulder screws and pivoting surfaces.

What should I do if the tool does not operate smoothly?

Disassemble, clean, and lubricate the tool.

Download PDF (1.9 MB)

More Greenlee Manuals


View all Greenlee manuals →