This manual provides instructions for use and maintenance of the Ultra Tugger® 8 Cable Puller and Pulling Packages.
The Greenlee Ultra Tugger 8 Cable Puller is designed to pull cable through conduit and in tray, developing up to 35.6 kN (8000 lb) of pulling force. This instruction manual covers safety information, identification of components, and specifications for the tool and its accessories. It serves as a guide for personnel to safely operate and maintain the equipment.
| Weight | 38 kg (84 lb) |
|---|---|
| Dimensions Length | 29 cm (11.5") |
| Dimensions Width | 66 cm (26") |
| Dimensions Height | 17 cm (6.75") |
| Motor Voltage | 120 VAC, 50/60 Hz, single phase |
| Current Draw at Full Load | 15 amps |
| Sound Level | 75 dB at 1 meter |
| Power Source | 120 VAC, 60 Hz, 20 amps, single phase |
| Speed No Load | 2.74 m/min (9 ft/min) |
| Pulling Force Max | 35.6 kN (8000 lb) |
| Pulling Rope Diameter | 7/8" diameter |
| Pulling Rope Breaking Strength | 143 kN (32,000 lb) minimum |
The Ultra Tugger 8 can develop 35.6 kN (8000 lb) of pulling force.
A 7/8" diameter, double-braided, polyester composite rope with an average breaking strength of at least 143 kN (32,000 lb) is required.
The dimensions are 29 cm (11.5") in length, 66 cm (26") in width, and 17 cm (6.75") in height.
No, the cable puller cannot lower a load and must not be used as a hoist or winch.