GEORGIN GSI40 universal panel-mount indicator displays process, temperature, resistance and potentiometer signals on a 4-digit red LED display.
The GEORGIN GSI40 is a universal indicator in a panel-mount housing (48 x 96 x 90 mm, 45 x 93 mm cut-out) that displays a process, temperature, resistance or potentiometer signal in engineering units. Readings appear on a 4-digit red LED display with 14 mm digits and a programmable decimal point, a 50 ms refresh time, and overflow shown as "oUE". It is delivered with a set of 100 adhesive unit labels.
Inputs use an asymmetric differential configuration: ±10 V, ±200 VDC and ±20 mA process ranges with 24 V / 30 mA excitation, thermocouples J, K, T and N, 3-wire Pt100 and 2-wire Pt1000, resistance up to 50.00 kΩ and potentiometers from 100 Ω to 100 kΩ. The input signal is converted by 16-bit Σ∆ A/D at 20/s, maximum error is ±(0.1% + 1 digit), MIN and MAX values are permanently recorded, and the universal 12 to 265 VDC / 20 to 265 VAC supply consumes 3 W. Two SPDT relay outputs are available as an option, and a GSIDIN DIN rail mounting accessory is listed. This manual is written in French.
| Display | 4 digits by red LED, -9999 to 9999, programmable decimal point |
|---|---|
| Digit height | 14 mm |
| Refresh time | 50 ms |
| Process input | ±10 V (1 mV, 1 MΩ); ±200 VDC (20 mV, 1 MΩ); ±20 mA (2 µA, 20 Ω) |
| Excitation | 24 V ± 3 V / 30 mA |
| Temperature ranges | TC J, K, T, N; Pt100 3-wires and Pt1000 2-wires from -150.0 °C to +800.0 °C |
| Resistance input | 999.9 Ω, 9999 Ω and 50.00 kΩ ranges |
| Potentiometer input | Measuring range 100 Ω to 100 kΩ, current max. <0.4 mA |
| Accuracy | Max. error ±(0.1% + 1 digit), warm-up time 5 min |
| A/D conversion | Σ∆ technique, 16-bit resolution, 20/s rate |
| Power supply | Universal 12 to 265 VDC and 20 to 265 VAC |
| Power consumption | 3 W |
| Relay outputs (option) | 2 SPDT relay outputs, cut-off capability 260 VAC / 1A / 150 VA |
| Operating temperature | -10 °C … +60 °C |
| Front protection | IP65 |
| Dimensions | 48 x 96 x 90 mm, cut-out 45 x 93 mm |
| Weight | 150 g |
| Connections | Unpluggable spring-hold connectors, 1.5 mm2 max. |
It displays process, temperature, resistance and potentiometer signals in engineering units on its 4-digit red LED display.
It uses a universal power supply of 12 to 265 VDC and 20 to 265 VAC, with 3 W consumption.
The panel cut-out is 45 x 93 mm for a 48 x 96 x 90 mm housing fixed by a supplied bracket.
Yes, two SPDT relay outputs with inverse contact are available as an option, with 260 VAC / 1A / 150 VA cut-off capability.